If you are an angler, you know the importance of a good knife on the boat. A serious fisherman without his tools is going to be bad at his work. A fillet knife is one of the essentials which can allow you to cut and clean pieces of meat off a fish easily. Fillet knife is the best tool which will make sure that you do not swallow any bones. It is important that you have a sharp fillet knife before you make an adventure to the sea.

Rapala Fish’n Fillet Knife

Rapala Fish’n Fillet Knife is the best fillet knife with Finnish blade and birch handle. This is one of the most appealing knives which will allow you to have an effective catch. The blade can resist corrosion wears and is also delicate enough to work through the Y bones easily. It comes in a complete leather sheath and a single-stage knife sharper to help you on the go.

Buck Silver Creek

One of the main challenges that anglers have to face is to find a folding pocket knife which is not weak to filet. Buck has a mid-lock back design which can help prevent slips from having an accidental closing. The blade is 6.75 inch, scalpel shape and made with stainless steel to easily sink deep and cut out the right chunk of meat. You can also enhance durability and resist rust as it has a titanium coating and comes with a lifetime guarantee.

Victorinox cutlery fillet knife

A fillet knife which is appropriate for the kitchen knife but with the right handle, it can stand the test of time. If you are comfortable working with a simple tool, this knife with just a low sweep can allow you to use for boning out the unlimited fish a number of times.

Berkley deluxe electric fillet knife

If you are on a fishing kayak and need a blade which will get the job done, Berkley Deluxe is your best option. This is the best for the people who are trying to make short work on larger catches. This is an electric knife which runs with the right adapters and allows you to run at a 110-volt outlet. The ergonomic handle will keep everything working well without cutting power and control.

Knives of Alaska Steelheader Suregrip

Knives of Alaska is hard to use in the wilderness but perfect for kayak fishing. It is rated 60 at the Rockwell hardness scale, even with its slim body. It is tough enough to help cut through the meat and will not have water damage as the body is made of leather and the blade is covered with a nylon sheath.

If you are looking for the best fishing activities with your trolling boat, then a dependable trolling motor battery is a must-have accessory for your boat. Trolling boat motors in a similar way to other electric motors require particular types of batteries that can discharge their electrical power over an extended period smoothly. However, not all trolling battery brands can deliver quality services just because they look good outwards. Below is a list of the best trolling motors batteries that will provide the most promising and superior performance to get the best value for your investment.

What are the features in a trolling motor battery you should look for in the best battery brands? Find out on their website.

High quality trolling motor batteries have features such as being durable, light and reliable. Or you can always use your knife. Batteries can vary significantly in terms of quality and capacity, making it necessary to understand some of the basic features to look in these batteries.

Amp Hours (Ah)

The amp-hour indicates the capacity of the electricity it can supply for a given period. It is one of the most critical factors you should consider since it stated the overall time the battery can power your trolling boat. Small batteries will often have their amp-hours ranging from 25 to 50 Ah while the larger batteries can have over 100 Ah. However, your boat power voltage determines the type of battery you can choose.

Power System.

Most batteries come with a 12 volts capacity and thin means you need about two or more batteries to power a 24-volt trolling motorboat. It is therefore imperative to understand your boat power system and other demands of a battery before you can buy any battery. Learn more here.

Construction, Design and Maintenance.

Modern batteries have embraced advanced technology to make. Hence they do not need any maintenance when compared to the older version. You can also use then securely in any position of your boat, whether in the upside-down or right side up. Also, some batteries have a thicker insulating plastic cover that protects these batteries from unnecessary vibration. If you need help check their reviews.

The best battery brands for your trolling boat

The Optima Batteries 8016-103 D34M.

The Optima Batteries 8016-103 D34M is a multipurpose battery that is suitable for both deep cycling and boat starting. It comes with over 120-minute extra storage capacity in addition to 750 CCA. It is the most reliable battery with the best overall performance, and adequate electrical size for any practical boat uses. It comes with a two-year limited warranty. It has the best design that is easy to mount on your boat and quickly. It features thick plastic covering to prevent vibrations from damaging it. However, it is easy to ruin this battery in case of overcharging for an extended duration.

Universal UB121000-45978 12v 100AH.

It is a high-quality battery considered to discharge electricity over an extended duration of time. It features the AGM technology that ensures efficient, reliable and faster recharging and slower discharging for improved performance. No maintenance required in this battery, such as refilling with acid water that is common with lead-acid batteries. Excellent energy storage. This battery comes with one year warranty as a guarantee of its high quality. However, this battery is not suitable for starting mechanical equipment, start motors or any other machinery.

There is a debate on the safe use of a weapon mounted tactical light. But, with the right light, it is easier for the user to aim at the target even in complete darkness. As most of the self-defense situation occurs at night, it important to identify the situation as treating before firing. The use of the target, bright lights can help you buy time in this treat situation.

Handheld flashlight

A handheld flashlight helps you search the house and identify if the threat is real or it is a false alarm and then decides to point your gun. However, the right weapon mount light allows you to keep both your hands on the gun while you look around the house. The key is to look for the best ar15 flashlight with high lumens, which helps you to light up the room while looking while your rifle is ready for any surprise attacks.

The pros of a weapon-mounted light.

You get to use both of your hands

A weapon mounted flashlight allows you to use both your hands as you might be able to operate your firearm when your adrenaline has seized dexterity. A free hand can help you open or close doors and keep everyone out of any harms way.

No wasting time looking for light under stress

A weapon mount flashes you to act quickly when you do not have to look for various things while you are trying to protect yourself. The act of looking and making noises can alert the danger that you have woken up and can put in danger.

Focus on the situation

Try to manipulate a gun and a flashlight requires a lot of skills. A weapon mounted light takes away one less thing to worry about and allows you to focus on your surroundings and focus on your target.

What you need to look for in a mounted light

If you are planning to buy a mounted light, there are certain things that you need to look for when it comes to your safety.

Brightness

The brightness of a weapon mounted light need to be bright enough to stun or disorient someone, the brightness of up to 100 lumens. Too bright the brightness you will risk not being able to see at night due to the reflection.

Size

The last thing you want is to weight down your rifle. A light weapon-mounted flashlight gives you enough time to adjust the reflex sights, scopes and other accessories.

Ease of use

The weapon light needs to be easy to operate. In these times of stress, you do not want to complicate the situation.

Knives are not only used for domestic but industrial use as well, but industrial knives are not like domestic knives as they are much more powerful and requires a need to be maintained to avoid any dangerous consequences. These knives are used for different purposes and require them to perform well as they are generally used for chopping wood.

Circular saw blade

One can see this type of blade in the timber industry as it helps in slicing large logs of timber. These blades can also cut into the metal which is operated electrically to prevent the chances of an injury. The quality of these materials are good and have to be customised according to the work they have to perform.

cross cutter knives

Cross cutter knives is a knife where one edge remains plan, but the other edge is serrated, enabling a better cut. The main purpose of this knife is to make the cutting process much easier and by not applying a lot of pressure on the object. These knives are extremely dangerous if mishandled.

Assist opening knives

This assist opening knife is a knife used to help assist other knives in their function; hence, the name assists opening knife. This knife is not as sharp as the other but can do real damage if not handled properly. It is generally used in all industries where a little assistance with wood or metal chipping is required.

Clip folder

Clip folder knife is generally seen during mountain climbing where they are attached to belts for easy access and are super popular while carrying out daily outdoor activities. Although not a very sharp knife, it can help in the process of cutting tough ropes or help set you free.

Machete

Machete is a sharp blade which can cut through anything depending on the duality and durability of the blade. Many workers carry them on an everyday basis to slash through wood or other heavy metal objects to help them in the overall process of manufacturing in the wood industry. This knife although very easy can have quality issues it is better that you choose these knives from a trusted service such as americanquicksilver.com to help in better workings of you machinery.

Multitool

A great self-contained a folding tool which has basically everything but in miniature form. It includes blades, pilers. Files, driver, etc. Depending on your industry, the blades might differ in their function. You might have most commonly seen them with people who enjoy outdoor endeavours. The blades might seem small but can do serious damage as it is designed to chip away wood and metal.

While going on a camping trip or just a hike, there is always a possibility that one might get lost or even people might fall into some form of trouble, but little do people know just having one top rated fixed blade knife can help them in this situation. It does no matter what type of a knife you have but as far as it is in good condition that it all you need. The following are few survival knife hacks that you must do and follow to survive in the wilderness.

1) Use easily available items to sharpen your knife –

     While in the wilderness you are guaranteed not to have specialized knife sharpening tools which can help you sharpen your knife thus during times like these it is always good to improvise rather than leaving things to fate. You can use various items on and around you to sharpen your knives such as coffee mugs, plates and even river stones which are generally abundantly available in the wilderness.

2) Make a good grip –

     Generally, knives do come with a good rip and handle, but at times of fear and hurry, no one can perfectly get a good grip on the knife especially if you have sweaty palms which are just going to land you even more in trouble. The simplest way to improve the grip on your knife is by tying rubber bands on various places on its handle. The rubber band acts as a great grip provider and ensures that you have complete control over the knife.

3) Make easy and Instant cover for your knife –

     Sharpening the knife and making it have a great handle to control it will mean nothing if you can’t maintain the sharpness of the knife. Due to the regular use of the knife, it may tend to lose it sharpness and also to protect yourself you must most certainly add a cover over the blade. The best of adding a cover over the knife blade is by merely using a straw or even a plastic wrap which can help you maintain its sharpness for a more extended period of time and as I also allow you to keep the knife close to you at all times without the chance of you injuring yourself.

4) Use knife only when necessary  –

      For sure, knives might be a great tool when it comes to surviving in the wild but make sure to use it only when required. Knife’s steels are built to withstand most things, but at a certain point, it may also brake thus at times such as hunting or frightening away animals, stick and stops are perfectly valid tools.

5) Building necessary shelter should be your number one priority –

      Having an easy to make a tent in the wilderness is obviously the easy way of living in the wild but no matter what it is one must always carry a knife with them. Knives are great tools with which you can gather various items such as big leaves, chunks of wood and you can even use a knife to make an instant rope which you can use to tie the leaves and wood to make a temporary tent.   

The binoculars have been around us for years and the hunters and other professionals have kept using it for different purposes. The binoculars didn’t get enough appreciation in the past because people believed that it isn’t good for their eyes. But with the passage of time, it proved that their thoughts were completely wrong and binoculars do not put any negative effect on their eyes.

So, the time passed and binoculars went through many changes and now they are in the shape that we use nowadays. Everything that belongs to tech industry goes through many significant changes throughout its history and the same is the case with the binoculars. However, the binoculars haven’t seen many changes like several other tech gadgets. Today, we are going to take a visit to the history to help you take a look at the initial shape of binoculars.

So, just put on your seat belts and get ready to take a ride on the time machine. Make sure that you take your friends along as they are also going to enjoy this amazing ride. If you need extensive information on this topic, just take a look at the information shared by The Binoculars Guy because we are just going to talk about some visual things.

If you want to learn more about the functionality of old binoculars, you can either take a visit to a nearby museum or you can also take a look at the information shared on the internet by authentic bloggers such as The Binoculars Guy. However, let’s take a look at the visual changes that binoculars have gone through.

Size

The size of the binoculars has significantly changed and you can simply determine the difference. Although there are many large binoculars available nowadays, the old binoculars were still larger than the ones that we use nowadays. So, it was very difficult for the hunters and other professionals to hold the binoculars in their hands. Therefore, they used several stands for this purpose due to which they were unable to carry the binoculars with them while traveling around.

Weight

The weight of the binoculars was also a headache in the past because people were unable to hold it into their hands. The size wasn’t the only issue due to which the binoculars were too heavy but there were several other elements that played a role in increasing the weight of the binoculars. However, you don’t need to be worried anymore because binoculars are very light these days.

The number of glasses

There were a huge number of glasses in the binoculars because it was impossible to see the distant places without the help of these glasses. However, the experts have now decreased the number of these glasses with the help of latest technology. Here is more information about how binoculars looked like in the past.

Custom knives are considered to be a better option if you are looking to buy a survival knife because custom knives are made with the extreme quality metal while the ordinary, commercial knives are made with the average quality material. The material that is used in the production of blades is really important when it comes to deciding that which type of blade is going to work fine for you.

The purpose of buying the knife may help you decide that whether a particular material is ideal for you or not. In this Review Article, we are going to explain the different types of blades that are used in the knives. Thus, you’d find it easier to decide the right type of blades for your knife. There are different kinds of materials that are used in the production of custom knives such as Alloy Steel, Stainless Steel, and Carbon Steel.

We will describe the features of these different materials to help you decide that which blade is going to work fine for you. Here are some of the best blades that you may choose for a custom knife.

Alloy steel

There are two different types of alloy steels. One is known as high alloy steel and the other is known as the low-alloy steel. The high-alloy steel is specifically used in the production of knives. Additionally, this material is used for producing the larger knives. This material is capable of resisting corrosion and humidity. It is also harder than other materials. Knives made with this material are rarely found in the market but if you could find one, you’d be able to use it for a very long time.

Stainless Steel

Most of the knives are made of the ordinary steel but when it comes to talking about the custom knives, the ordinary steel is rarely used. Stainless steel is a much better alternative and it is commonly used in the custom knives. The strength and resistance of the stainless steel are the most important elements that make it popular in this industry. These blades are extremely hard and they will last for a long period of time.

Make sure that you carefully choose the material because the newbies may find it difficult to decide between stainless steel and semi-stainless steel blades.

Carbon Steel

Carbon steel is another popular material that is used in the production of knives these days. Carbon steel exhibits a lack of chromium, therefore it is considered to be different than stainless steel. However, there are many advantages of this material that make it popular among most of the people. Here are some other types of blades used for knives.

Whether you cook food at your home or work as a chef in a restaurant, you need to buy the perfect set of knives so that you can easily cut different types of meats. There are different types of knives available nowadays that can fulfill your needs in different circumstances. If you don’t know how to find the perfect knives for cutting different kinds of meats, don’t worry because we can help you find the right type of knives for your needs.

The most important thing you need to keep in mind is to make sure that you find the knife that feels graceful and comfortable in your hand. Thus, you would enjoy a lot when cooking food in the kitchen. There are many different types of meats and they all supposed to be cut with the right type of knife. You cannot use the same knife on all types of meats.  You can find some of the sharpest knives on the gun source; check their shop.

Here are the tips you need to follow when choosing the right knife for cutting different kinds of meats.

The sharpness

The sharpness of the knife is the most important element when it comes to buying the right type of meat slicing knife for cutting different kinds of meats. If you are going to cut the hard pieces of meat, then you should use the sharp knife so that it can easily cut the meat into pieces.

However, the light pieces of meat can easily be cut with the help of the normal knife. The normal knives are usually used to cut the vegetables but they can also be used to cut the light pieces of meat.

The thickness

The thickness of the knife can help in determining that whether it can cut a particular type of meat or not. For example, if you are looking to cut the meat of the chicken, there is no need to use a thick knife because you can easily cut it into pieces with the help of a thin knife. Similarly, if you are trying to cut the meat of a lamb, then you need to use a thick knife because the thin knives can break if you tried to put some pressure on them to cut the thick meat.

Grip

The next thing you need to keep in mind is to make sure that the knife you are buying has the perfect grip so that it may not slip from your hands. Thus, you’d stay safe while cutting different types of meats. So, you should keep in mind that you should only buy the knife that provides you the perfect grip. Here are some other important tips you need to look for when choosing a knife.

The warriors in the past were a lot different from today’s warriors. They used to wear different kinds of costumes. Their bravery was a lot better than today’s warrior. They used to fight with the enemies face to face without any kind of fear in the mind. The technology has now reduced the bravery of the warriors by facilitating them in different ways.

We are not saying that today’s warriors are not brave but we are trying to say that they can’t beat the bravery of the past warriors. You must have seen movies related to wars where you’d seen the warriors wearing some special kind of costume. So, everyone is aware of the costumes that warriors used to wear in the past. However, no one has ever noticed that what kind of boots they used to wear in the past.

In today’s world, you’d see warriors wearing Composite and steel toe boots. So, if you want to look like today’s warriors, you can choose to wear composite or steel toe boots. However, before making a decision, you should take a look at the composite toe vs steel toe comparison so that you may find the best option.

Let’s talk about the boots that warriors use to wear in the past.

Roman

The Roman warriors introduced the modern footwear for the first time when they started using it during their wars. They used to travel for miles on their foot, therefore, they felt an extreme need of wearing these boots. The boots they used, in the beginning, were not comfortable enough but they still felt very relaxed after using those boots as they helped them travel for miles without any kind of wounds and injuries.

Spikes

The shoes will spike became very popular in the 16^th to 17^th century. The warriors started using these boots widely as they found them really helpful while participating in different wars. The reason they preferred wearing such kind of boots is that they provided them the extreme level of comfort and they helped them stay stable while fighting against their enemies.

Neck Boots

The neck boots became the most important part of the most of the armies in the 19^th century. These boots remained in use for a very long time and there are many armies that are constantly using these boots as they provide them the extreme level of comfort. The neck boots have now become a trendy fashion these days. However, for the first time, these boots were used in the past and they were made with the help of leather. Special warrior boots were designed for the warriors that had the higher ranks in the wars. Here is more information about how warrior boots looked like back in the day.

The crossbows have become very common these days. The crossbows that we see nowadays are very different from the ones that were used in the past. There are many incredible features added to the crossbows these. For example, if you take a look at the archery-den crossbows, you’d realize that they can provide you several outstanding features that are not even found in the latest rifles.

However, the crossbows have gone through several changes and there are many advancements made to the crossbows over the time. In this article, we are going to take a look at the evolution of crossbows where we will talk about the changes that are made to the crossbows over time.

You’d be shocked to hear that the Bible has also mentioned the crossbow in its scriptures. It means that the crossbow has been around for thousands of years. Although its name was different at that time, the basic features were almost the same. King Uzziah used the crossbows to beat its competitors. These crossbows were known as the Ballista at that time. The Ballista was used to hit the target from a distance place by launching a missile.

The handheld crossbow belongs to East Asia as it was hugely used during the wars in 6^th Century BC. There are no signs about the person or group that actually invented this weapon. However, it confirmed that it was used in the Chinese wars for the first time. But there are some researchers that claim that the crossbows were invented by the neighboring territories of China. That’s not a point of discussion at the moment so, let’s move to the next part.

The crossbows that were used in the past were not as advanced as today. However, they had the ability to shoot the target from a distant place. The signs of crossbows are also found in the forts that are found in different parts of the Rajasthan. The Rajashtani Emperors used these weapons to protect their forts from the enemies.

There was an elastic string used in the crossbows that was used to throw the arrow at the target. It was not possible for a single person to use the crossbow alone because of its complicated features. That’s why two people use to operate it together. However, the changes were made with the passage of the time and now only a single person can easily use the crossbow.

The old crossbows were only capable of shooting one arrow at a time but now there are some crossbows that can be used to throw multiple arrows at the same time. The rapid-fire feature was also added to the crossbows but it didn’t become successful. Now, you can shoot your target with a crossbow by simply pressing the trigger. Click Here and find detailed information about the evolution of crossbows.